English - Brightwell Duoplus Manual Del Usuario

F
ORMULA
As an optional extra, the DuoPlus unit can be fitted with a Formula Module.
Button 1 on the module enables the user to remotely select between three wash programs (Standard, Heavy
Soil & Half Load).
Button 2 on the module enables the user to remotely enable or disable the Fabric Softener / Destainer.
Off = Standard
On = Heavy Soil (50% more
chemical)
Flashing = Half Load (25%
Note: By pressing & holding both button 1 & 2 together for a 5 second period, you can reset the unit (e.g.
Standard mode & pump 2 OFF)
FITTING
Before fitting, please ensure that the power to the unit has been isolated.
Open dispenser and pass the cable through the gland situated on the bottom of the unit. Run it to the vicinity of the
connection socket on the circuitboard.
Fit the green connector with the coloured wires in the order shown above. Plug the connector into the correct
socket and tighten the gland to grip the cable (ensuring that you have left enough slack for the box to close).
The Module will automatically be accepted by the unit and will require no additional programming.
Note:
Pump 2 will now be disabled during each wash cycle unless button 2* has been pressed to activate it.
Pump 1 will still run at the screen set parameters, unless button 1* is pressed.
* on the formula module
13
M
ODULE
Button 1
Indicator
less chemical)
R2
1 2
Blue
Green
White
Yellow
Black
Red
E
Button 2
Indicator
Off = Pump 2 OFF
On = Pump 2 ON
B L S
RIGHTWELL AUNDRY
NGLISH
- D
YSTEMS UOPLUS