Product Familiarisation; Unpacking Your Tool - Silverline 678973 Manual Del Usuario

Adiador para cadenas de motosierras 220 w;

Ocultar thumbs

Contenido

página de 29

/ 29
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

678973

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewellery or long hair can be

caught in moving parts

g) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection

can reduce dust-related hazards

Power Tool Use & Care

a) Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed

b) Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be repaired

c) Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the power

tool accidentally

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool's

operation. If damaged, have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control

g) Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could

result in a hazardous situation

Service

a) Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained

Grinding Tool Safety

• Always wear appropriate personal protective equipment. When using this machine,

adequate eye protection, ear defenders and breathing protection must be worn

• DO NOT operate this machine without the appropriate guards in place

• Grinding tool accessories must be mounted, used and stored in compliance with the

manufacturer's recommendations

• The maximum speed of the cutting/grinding disc or other accessory must always be

higher than the maximum speed of the machine on which they are mounted

• Do not use any form of spacers or adapters in an attempt to make an incorrectly sized

wheel fit your machine

• Ensure that the cutting/grinding disc or accessory is fitted correctly and securely

before use. Run the machine with the disc or accessory fitted, but without load, for a

reasonable time before attempting to cut/grind. If excessive vibration occurs, stop the

machine, investigate and correct the cause before use. Seek professional guidance if

you are in doubt about how to operate the machine safely

• If the grinding wheel vibrates, turn off the machine immediately and check it is mounted

correctly securely and that it is not damaged

• All wheels and accessories must be checked before installation. If a wheel is damaged

in any way, such as by being chipped, fractured, warped or misshapen, DO NOT USE

AND DISCARD. If you are unsure about whether a disc is safe to operate, DO NOT USE

AND DISCARD

• Always ensure that accessories are suitable to use. Check the expiry date on the label.

Resin-based and other grinding and cutting discs and wheels CANNOT SAFELY BE USED

beyond their expiry date

• Do not allow discs to become wet or contaminated with oil. If you suspect that a wheel

has degraded in storage, or if you are unsure about whether its expiry date has passed,

DO NOT USE AND DISCARD

• The wheel will continue to rotate for some time after the machine has been switched

off. Allow the moving parts to stop completely without interference. Do not try to stop

the machine by holding an object against the disc.

• A grinding wheel will gradually wear down during use, reducing its size. If a wheel

becomes too small to work with easily, stop using it and replace it with a new disc

All manuals and user guides at all-guides.com

www.silverlinetools.com

220W Chainsaw Sharpener