ingenuity intrust 35 Manual Del Usuario página 37

• There are three (3) recline adjustment positions.
• Place the recline adjustment foot in the position that
allows the bubbles of the level indicators to be between
the indicator lines.
• If the bubbles are still not between the indicator lines,
place a rolled towel or pool noodle under the base
against the back of the vehicle seat. The recline foot must
be in the lowest position. Ensure that the towel or pool
noodle does not interfere with any other step of the base
installation process.
5. Remove the LATCH belt connectors from the storage slots
in the base.
6. To lengthen the LATCH belt adjustment strap, press the
button on the adjuster and loosen.
7. Hook the LATCH connectors from the
base to the vehicle's lower anchors.
Push the connectors onto the anchors
until you hear an audible "click. "
8. Pull firmly on the LATCH connectors
to ensure that they are attached.
NEVER put two LATCH connectors on
one vehicle LATCH anchor. Ingenuity
does not recommend using the
LATCH system if the spacing is not 11
inches (280 mm).
9. Tighten the LATCH connection by
All manuals and user guides at all-guides.com
36