Handle Assembly - sunjoe GTS4000E Manual Del Operador

Grass Trimmer
Assembly
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.

Handle Assembly

1. Clamp the auxiliary handle with the telescoping pole using
the 4 screws, as shown (Fig. 21).
Fig. 21
Auxiliary
handle
Screws
Clamp
Telescoping pole
Fitting the Safety Guard
m
WARNING!
The guard must be properly installed.
The guard provides the operator and other bystanders with
some protection from thrown objects.
1. Place the safety guard on the trimmer cutting head and
align the mounting groove (Fig. 22).
Fig. 22
Screw
Grass trimmer
Cutting head
2. Firmly press the safety guard into place and secure it to
the trimmer head with the two screws provided (Figs. 23).
NOTE: Never use the tool unless the safety guard is properly
fitted.
Fig. 23
Auxiliary
3. Make sure to remove the cutter guard cover from the line
handle
cutter before using (Fig. 24).
Fig. 24
Cutter guard
Clamp
Fitting the Grass Trimmer
1. Insert the telescoping pole into the grass trimmer cutting
head. Press down on the quick-release button to lock it
into position (Fig. 25).
Safety guard
Fig. 25
Quick-release
15
button
Grass trimmer
cutting head
Screws
Telescoping pole