Moisture Meter; Technical Data; Safety Instructions - BGS technic 2191 Manual De Instrucciones

Medidor de humedad
Ocultar thumbs Ver también para 2191:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TECHNICAL DATA

Power supply:
Measurement Range: Wood Moisture:
Temperature:
Resolution:
Temperature:
Accuracy
Temperature:
Working Temperature:
Storage Temperature:
Dimensions:
Weight (without batteries):
CAUTION
Read and understand all rights and information in this manual.
Failure to comply with unconscious rights and information may include control and oversight.
Keep the operating instructions in a certain and controlled place for future reference.

SAFETY INSTRUCTIONS

This manual belongs to the product. It contains important notes on operating the unit. Please
pass it on along with the unit if it is handed over to a third party!
Dispose of the packaging materials carefully; the plastic bags may become a deadly toy for
children.
Keep the moisture detector out of reach of children.
Do not allow liquids of any kind to enter the unit.
Attention! The measuring probes may cause injuries due to improper use.
If you do not plan to use the unit for some time, remove the batteries.
Do not disassemble, burn, or short-circuit batteries and do not attempt to recharge non-
rechargeable batteries.
Do not mix old and new batteries and use only batteries of the same type.
Do not disassemble the unit or attempt to repair it yourself. It does not contain parts serviceable
by you. In the case of questions or problems, turn to our customer support.
• Please note the following safety notes to avoid malfunctions, damage or physical injury.
Introduction
Important: A self-test is carried out when switching on. The test picture is not a defect.
This moisture detector can measure the absolute moisture of wood and other building materials. You
can check the moisture content of laminates, rafters, beams freshly cut wood, veneer, panels, flooring
materials and the likes. With this moisture detector you can undertake measurements in wood and
hardened material as well as temperature measurements in °C and °F.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen

Moisture Meter

4 x 1.5 V LR44
6 to 42%
Material Moisture:
0.2 to 2%
0 to 40°C (32 to 99°F)
Wood Moisture:
1 %
Material Moisture:
0.1%
1°C / 2°F
Wood Moisture:
<30% ±2% / >30% ±4%
Material Moisture:
<1.4% ±0,1% / >1.4% ±0.2%
not specified
0 to 40 °C / humidity < 75 %
-10 to 50°C / humidity < 75 %
80 x 40 x 20 mm
50 g
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 2191
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicidad

Tabla de contenido
loading

Tabla de contenido