•
HIGH outdoor temperature alarm
•
LOW indoor humidity alarm
•
HIGH indoor humidity alarm
•
LOW outdoor humidity alarm
•
HIGH outdoor humidity alarm
•
LOW air pressure alarm
Default alarm values:
Temperature
Low
High
Humidity
Low
High
Air pressure
Low
LOW INDOOR TEMPERATURE ALARM SETTING
Note:
After pressing the ALM DATA key within the LOW indoor temperature alarm setting there are the
following individual sub-settings.
To set the LOW indoor temperature alarm (default OFF):
I.
Buzzer ON/OFF (alarm sounding):
1.
Press the ALM STOP key to set buzzer ON/OFF. The "
buzzer alarm is ON. No acoustic alarm signal will be heard when the weather alarm
is trigged if buzzer is set OFF.
II.
Set the alarm ON/OFF:
1.
Press the MAX/+ or MIN/- key to activate the alarm ON/OFF.
III.
Set the alarm value (default 0ºC)
1.
Press the SET key to enter the alarm value setting (alarm value flashing)
2.
Use the MAX/+ or MIN/- key to set the alarm value.
3.
Press the SET key to confirm and enter the HIGH indoor temperature alarm
setting.
IV.
If no LOW indoor temperature setting is needed, please press the ALM DATA key to enter
the HIGH indoor temperature alarm setting.
HIGH INDOOR TEMPERATURE ALARM SETTING
Note:
Within the HIGH indoor temperature alarm setting there are optional sub-settings which can be
set individually.
To set the HIGH indoor temperature alarm (default OFF):
I.
Buzzer ON/OFF (alarm sounding):
1.
Press the ALM STOP key to set buzzer ON/OFF. The "
buzzer alarm is ON. No acoustic alarm signal will be heard when the weather alarm
is trigged if buzzer is set OFF.
II.
Set the alarm ON/OFF:
1.
Press the MAX/+ or MIN/- key to activate the alarm ON/OFF.
III.
Set the alarm value (default 30ºC)
1.
Press the SET key to enter the alarm value setting (alarm value flashing)
2.
Use the MAX/+ or MIN/- key to set the alarm value.
3.
Press the SET key to confirm and enter the LOW outdoor temperature alarm
setting.
IV.
If no HIGH indoor temperature setting is needed, please press the ALM DATA key to enter
the LOW outdoor temperature alarm setting.
0ºC
30ºC
20%
90%
1000hPa
34
" icon will appear if the
" icon will appear if the