TFA IQ-WS 35.1040 Manual Del Usuario página 88

Note:
For accurate barometric pressure trend, the Intelligent Weather Station should operate at the
same altitude. For example, it should not be move from the ground to the second floor of the
house. Should the unit be moved to a new location, discard readings for the next 12 – 36 hours.
INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE:
The indoor temperature and humidity data are automatically updated and displayed on the third
of the LCD.
Indoor relative
humidity in %
Indoor comfort indicator
COMFORT LEVEL INDICATOR:
Dry : the "Dry" indicator will appear when the relative humidity range is lower than 45%.
Comfort : the "Comfort" indicator will appear when the relative humidity range is between
45% and 65% and the temperature range is between 20.0ºC and 25.9ºC.
Wet : the "Wet" indicator will appear when the relative humidity range is higher than
65%.
HAPY/SAD FACE COMFORT LEVEL INDICATOR:
J (happy face)
: A happy face icon "J" indicating a temperature level between 20°C and
25.9°C and relative humidity reading between 45% and 65%.
L (sad face)
: A sad face icon "L" indicating any value outside the comfortable range.
OUTDOOR TEMPERATURE AND HUMIDITY:
Outdoor humidity
display in RH%
Outdoor
reception signal
Transmitter identification number (only if there are more than one transmitter)
The seventh LCD section can show the outdoor temperature, the reception indicator, the
minimum or maximum reading. A number in the bottom part will also be shown if more than one
transmitter has been used.
TOGGLING BETWEEN MIN/MAX INDOOR AND OUTDOOR RECORDINGS:
To toggle between the current, minimum and maximum data and the times they were recorded,
press the MIN/- key for viewing the minimum values, and press the MAX/+ key for viewing the
maximum values (shown in MIN or Max displays).
When pressing the MIN/- or the MAX/+ key, the MIN and the MAX data will be displayed as
following sequences:
1. MAX or MIN outdoor temperature data with time and date of recordings. Data will flash
2. MAX or MIN outdoor humidity data with time and date of recordings. Data will flash
3. MAX or MIN indoor temperature data with time and date of recordings. Data will flash
4. MAX or MIN indoor humidity data with time and date of recordings. Data will flash
5. Return to current indoor and outdoor data.
TO VIEW THE MIN/MAX DATA FROM DIFFERENT TRANSMITTERS
MIN/MAX data from other transmitters can only be displayed if there is more than 1
transmitter used.
Indoor temperature
in °C or ºF
Outdoor
temperature
in °C or °F
41