Moon Phase - TFA IQ-WS 35.1040 Manual Del Usuario

Weather data
Temperature
Humidity
Air pressure
GENERAL ALARM
The general alarm indicator (red LED) and the general alarm icon will flash when any Weather
Alarm occurs.
General Alarm Indicator
The general alarm indicator is located at the top of the weather station. It will flash when any
weather alarm occurs to indicate that a set weather condition has been reached.
To stop the general alarm indicator from flashing press the ALM STOP (or any other keys) to
switch off the indicator.
General Alarm Icon
The general indoor alarm icon will flash when indoor temperature alarm, indoor humidity alarm
or air pressure alarm occur. The general outdoor alarm icon will flash when the outdoor
temperature and humidity alarm occurs.
To switch off the general alarm icon, press the ALM DATA key.
Additionally, the trigged alarm value and time will then be displayed briefly for 2 seconds
on the bottom part of the weather station LCD.
If more than one Weather Alarm occurred, each trigged alarm value and time can be
viewed by pressing the ALM DATA key. Each Weather Alarm will be displayed for 2
seconds.
The general indoor (or outdoor) alarm icon will be switch off when all indoor (or outdoor) trigged
alarms information are displayed.

MOON PHASE

The Moon icon of the weather station will also display 12 different Moon phases according to the
set calendar.
Note: In the southern hemisphere, the phases of the moon are same but the shape of the moon
is mirror inverted.
Hysteresis
1°C
3% RH
1 hPa
General alarm indicator
General indoor
alarm icon
General outdoor
alarm icon
38