Technical Data - Steinberg Systems SBS-SF-1000 Manual De Instrucciones

U S E R M A N U A L

TECHNICAL DATA

Parameter Parameter value
description
Product name Sat-Meter
Model SBS-SF-1000
Power supply Input, AC 230V/50Hz;
Output DC 12V /2A
Battery type 7,4 V/1400 mAh
Working - 10~+50
temperature [°C]
Frequency 950~2150
range [MHz]
Input signal Signal level
[dBm]
Impedance
Transponder
data ~45 Msps
transmission
rate
22K signal Supported by
Signal processing
DiSEqC 1.0 Supported by
USALS Supported by
EN
Demodulation
DVB-S2: 8PSK,
Connector type F
USB port Yes
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation. (general
warning sign)
ATTENTION! Electric shock warning!
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to SAT METER. Do not use in very
humid environments or in the direct vicinity of water tanks.
Prevent the device from getting wet. Risk of electric shock!
-65~-25
Do not cover the ventilation openings!
2.1. ELECTRICAL SAFETY
75 Ω
(Concerns the device connected to a charger)
a) The plug must fit the socket. Do not modify the
1 Msps
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
is exposed to rain, comes into direct contact with a
wet surface or is operating in a damp environment.
Water getting into the device increases the risk of
damage to the device and of electric shock.
QPSK, c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it
16 APSK,
to carry the device or to pull the plug out of a socket.
32 APSK
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
f) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
g) To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
2.2. SAFETY IN THE WORKPLACE
a) Make sure the workplace is clean and well lit. A
messy or poorly lit workplace may lead to accidents.
Try to think ahead, observe what is going on and use
common sense when working with the device.
b) If you discover damage or irregular operation,
immediately switch the device off and report it to a
supervisor without delay.
c) If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e) In case of fire, use a powder or carbon dioxide
(CO2) fire extinguisher (one intended for use on live
electrical devices) to put it out.
f) Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
8
g) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
h) Keep packaging elements and small assembly parts
in a place not available to children.
i) Keep the device away from children and animals.
j) If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
2.3. PERSONAL SAFETY
a) Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
c) When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d) The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. BEZPIECZNE STOSOWANIE URZĄDZENIA
a) Do not use the device if the POWER switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the POWER switch are hazardous, should not
be operated and must be repaired.
b) Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
c) Keep the device in perfect technical condition. If
damage is discovered, hand over the device for
repair before use.
d) Keep the device out of the reach of children.
e) Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g) Do not leave this appliance unattended while it is in
use.
h) Clean the device regularly to prevent stubborn grime
from accumulating.
i) The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
j) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
k) Keep the device away from sources of fire and heat.
l) Do not overload the device.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is designed to measure satellite TV signal
parameters. The user is liable for any damage resulting
from unintended use of the device.
ATTENTION! This product's view can be found on the
last pages of the operating instructions (pp. 38).
3.1. DEVICE DESCRIPTION
1. Signal input
2. DC input (power supply)
3. USB port
4. Compass
5. LEDs:
• Power – (lights up when the power is on)
• Charge – battery charging (a diode lights green
- battery charged; a diode lights red - battery
is charging; a diode flashes red - no battery or
battery error))
• 22K – 22K signal
• 18V – 18V output for LNB signal
• LOCK – (lights up when signal is locked on)
6 Display
7 Signal quality value display (%)
8 Flashlight On/Off button
9 Control buttons panel
• MENU – go to the menu
• ˂˃ ˄˅ - cursor keys right/left/up/down; scrolling
up/down; changing parameter settings
• EXIT – exit/cancel current parameter settings
• OK – navigating the submenu; confirming
new settings after fine tuning; press to enter
parameter settings
10 POWER button (switching the device on/off)
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
50°C. Ensure good ventilation in the room in which the
device is being used. Keep the device away from any hot
surfaces. The power cord connected to the appliance must
be properly grounded and correspond to the technical
details on the product label.
3.3. DEVICE USE
After switching the device (power supply) on, the display
will briefly show the information about the software
version, and then the main menu will be displayed:
• FIND
After entering the Find submenu, the strength and quality
parameters of the signal, that have been selected or edited
by the user, are displayed to help in installation of the
satellite dish.
9
EN