Included Parts; Installation Procedure - Toto Connelly TS221C Manual De Instrucciones Y Del Propietario

Check to make sure that all these parts were included in your packaging:
Handle Assembly*
Screw and
Lock Washer
* Actual product may vary in appearance depending on the model.
Confirm that the valve has been
1.
installed properly.
N OTE: The finished wall surface should
be between the min and max markings
on the plaster guard. See the TSMA
installation manual for further information.
Remove the screw securing the
2.
plaster guard to the valve body,
then pull the plaster guard outwards
to remove it.

INCLUDED PARTS

Escutcheon*
Threaded
Extension

INSTALLATION PROCEDURE

Adapter
ARROW MUST
POINT IN
DIRECTION OF
WATER FLOW
Screw
Screw
3
Collar
Set Screw and
Hex Wrench
2-1/2" [65mm] MIN.
3-3/4" [95mm] MAX.
FINISHED WALL
SURFACE
MIN./MAX.
MARKINGS
Plaster Guard
Plaster Guard