Parts Included; Installation Procedure - Toto TBV01801U Manual De Instrucciones

Check to make sure that all these parts were included in your packaging:
Escutcheon*
Long Screws (2)
* Actual product may differ in appearance from illustration depending on the model.
1. Confirm that the valve has been installed properly and pull the plaster
guard outwards to remove.
NOTE: The finished wall surface should be between the min and max
markings on the plaster guard. See the TSPTM installation manual
for further information.
2. Use the two long screws to
secure the collar to the valve
(ill. 1). Make sure the screw
hole of the collar is oriented on
the bottom.
Correct Installation
Screw hole

PARTS INCLUDED

Collar
Adapter

INSTALLATION PROCEDURE

Handle
Screw
ill. 1
Valve
3
Screw and Lock Washer
Set Screw and Allen
Wrench
Finished wall
Collar
Long screws