Viega Multiflex Trio Visign MT3 Manual Del Usuario página 37

Instructions for use Multiplex Trio drain / overflow Visign MT3 / MT5
GB
B
Parts
 Connecting
adapter
 Inlet flange
 Valve cone
 Wedge seal
q Odour trap
Bowden wire
u 21
C
Dimensions
Model
6161.50 / 6161.51 / 6161.52
6161.60 / 6161.61 / 6161.62
6161.70 / 6161.71 / 6161.72
D
Pipe interrupter
Safeguard drinking water from contamination.
The drinking water quality must not be affected by bath water flowing back into the
drinking water system. To prevent contamination, a pipe interrupter must be installed
between the concealed shut-off fitting and the bathtub inlet. Local standards and
regulations must be observed.
Note: The pipe interrupter is not included in the scope of delivery and must be ordered
separately!
 Backflow situation:
If an underpressure situ-
ation should occur when
the bathtub is filled,
there is a risk that water
from the tub will flow
back into the drinking
water system.
 Overflow unit
 Flange cover
 Fastening screw  Valve top
 Sliding ring
 Wedge seal
Overflow pipe
u 22
100 - 260
130 - 370
100 - 680
 Installation diagram
 Profile seal
 Fastening screw  Rotatable collar
 Union nut
s Sliding ring
Sleeve
u 23
L H
180 - 400
180 - 430
180 - 480
37
 Seal
(only for use with
steel bathtubs)
 Profile seal
p Drainage elbow 40/50
t Union nut
 Connecting set with
concealed pipe inter-
rupter DN 20 in acc.
DIN EN 1717 DB
model 6161.86