For Windows Users - Lexmark CX825 Guia De Inicio Rapido

17
Check the gap between the printer and the finisher. If the gap is uneven, then rotate the side wheels of the finisher
clockwise.
18
Connect the power cords to the finisher and the printer, and then connect them to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an
appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
CAUTION—POTENTIAL INJURY: Do not use this product with extension cords, multioutlet power strips,
multioutlet extenders, or UPS devices. The power capacity of these types of accessories can be easily
overloaded by a laser printer and may result in a risk of fire, property damage, or poor printer performance.
19
Turn on the printer.
If necessary, manually add the finisher in the print driver to make it available for print jobs.
CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, keep hands clear of the labeled area
during print jobs that use the stapler in the multiposition staple, hole punch finisher.
Adding available options in the print driver

For Windows users

1
Open the printers folder.
2
Select the printer you want to update, and then do the following:
•
For Windows 7 or later, select Printer properties.
•
For earlier versions, select Properties.
Navigate to the Configuration tab, and then select Update Now ‑ Ask Printer.
3
4
Apply the changes.
For Macintosh users
1
From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.
2
Navigate to the list of hardware options, and then add any installed options.
3
Apply the changes.
7