Important Safety Instructions; Parts List; Required Tools - Tripp-Lite SR2POSTDP12HD Manual Del Usuario

Important Safety Instructions

SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation of
the product described in this manual. Failure to comply may invalidate the warranty and cause property damage
or personal injury.
• Keep the rack in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive
contaminants and dust.
• Leave adequate space at the front of the rack for proper ventilation.
• Inspect the shipping container and the rack for shipping damage. Do not use the rack if it is damaged.
• Tipping Hazard: Use assistance and avoid uneven floors during installation. The unit must be secured to building structure using
stabilizing means during installation.
• Install the rack in a structurally sound area capable of handling the load, the weight of the rack, all equipment that will be installed in the
rack and any other equipment that will be installed nearby.
• Save all packing materials for later use. Repacking and shipping the rack without the original packing materials may cause product
damage that may affect the warranty.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the
life support equipment or to significantly affect its safety or effectiveness is not recommended.
A
Channel
x2
F G
M8 Flat Washer Split Washer
x24
x24
#12-24 X 5/8"
Pan Head (Black)
x28

Parts List

B
Base Plate Waterfall Bracket
x2
H I
#8-18T-1/2" Gusset
x14 x4
Equipment Mounting Hardware
#12-24 X 5/8"
Pan Head (Silver)
x28
C
x2
J K
Accessory Brace
Bracket
x1
x2
Washer (Black) Washer (White)
x28
2
D
Cable Hook M8 X 20 mm,
1.25 mm Pitch
x14

Required Tools

• 13 mm Wrench
• 13 mm Socket Wrench (Ratcheting)
• Cross-Head Screwdriver
• T-Square (Optional)
Washer (Countersink)
x28
E
x24
x28