Important Safety Instructions - Tripp-Lite SRTH6UB Manual Del Usuario

Ocultar thumbs Ver también para SRTH6UB:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Important Safety Instructions

SAVE THESE INSTRUCTIONS
All sections of this manual contain instructions and warnings that should be followed during the installation and
use of the Vertical Expansion Rack as described in this manual. Read all instructions and warnings thoroughly
before attempting to move, install or use the Vertical Expansion Rack as described in this manual. Failure to
comply will create a risk of personal injury and property damage and may invalidate the warranty.
• Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and
gasses, conductive contaminants, dust and direct sunlight.
• Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into
the external ventilation openings of the enclosure.
• The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it
unassisted. Use a mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container.
• Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures or
more than one height adjustment kit on top of the enclosure.
• Inspect the Vertical Expansion Rack's contents for shipping damage. Do not use the Vertical Expansion Rack if it is
damaged.
• Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible.
• The Vertical Expansion Rack is intended to be installed on top of Tripp Lite SmartRack Rack Enclosure models that are
secured to the building structure for stability.
• This equipment is intended to be installed by skilled, qualified service personnel.
• Install the SmartRack Rack Enclosure and Vertical Expansion Rack in a structurally sound area with a level floor that is able
to bear the weight of the enclosure and all equipment that will be installed and/or equipment that will be installed nearby.
• Be sure to connect the enclosure to ground. See Ground Connection for more information.
• Use caution when cutting packing materials. The contents could be scratched, causing damage not covered by the warranty.
• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may
cause product damage that will void the warranty.
• Do not re-ship the enclosure with additional equipment unless the enclosure was shipped with a special shock pallet ("SP1"
models only). The combined weight of the enclosure and installed equipment must not exceed the load capacity of the
pallet. Tripp Lite is not responsible for any damage that occurs during re-shipment.
• Not for use when children are present.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the
failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
CAUTION
GROUND
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Srth12ubAg-0545Ag-0546

Tabla de contenido