Declaration Of Conformity - Spasciani H 900 CO P Instrucciones De Uso

properly the mask so that it adheres perfectly to the mouth and nose. The hair must be completely
covered by the hood.
 Once the hood is on the user's face, identify the escape route. Breathe calmly. The air inhaled could
be slightly heated; it is normal operation and indicates that the filter is filtering.
5. MAINTENANCE / EXPIRY DATE
The maximum life duration of the escape protective hood is of 10 years; as indicated on the label on
the bag, after 5 years it is required to check the condition of the device. The device must be sent to
Spasciani or to Authorised Workshops, which will check the weight of the product sealed; in case of
significant changes in weight, the filter will be replaced. After verification, the useful life of the cap
will be extended by 5 more years.
The escape protective hood must be disposed of after 10 years.
Maintenance of the escape protective hood must be performed only by specially trained qualified
personnel and should only be made using original spare parts manufactured by Spasciani.
6. STORAGE / TRANSPORT
The materials used possess excellent anti‐ageing qualities. It is, however, recommended to store the
new packed respirators in ventilated warehouses, at normal room temperature. Do not expose to
direct sunlight and to temperatures lower than ‐20°C or higher than +50°C.
When carried on the belt, avoid immersing the container in water or exposing it to heat sources.
Extreme temperatures for long periods could affect the product performances. It is recommended
to keep the new devices in their original packaging during transport and storage, so as to protect
them from possible impacts and exposure to dust. Avoid overlapping heavy objects on the device to
prevent them from getting damaged or deformed
7. WASTE DISPOSAL
Dispose of the worn filter and the escape protective hood in compliance with the local regulations
regarding disposal of special wastes.
8. CE CERTIFICATION AND MARKING
8.1. EC Certification
The H 900 protective hoods are:
‐ Personal Protection Equipment belonging to category III, as defined by the EU Regulation
2016/425, Paragraph I. The CE marking is located on the label on the filter, which represents integral
part of the device, and is followed by the number 0426 indicating the Notified Body Italcert S.r.l.,
Viale Sarca 336, 20126 Milan ‐ Italy, which has carried out the type tests for CE certification, and
which performs the production control according to the Form of the EU Regulation 2016/425. The
references to the standards applied for product certification are available on the label:
EN 403:2004 followed by class M (devices designed to be worn on persons)
8.2. Marking
See Table 2.
8.3. Declaration of Conformity
The EU Declaration of Conformity is available on the internet site www.spasciani.com, in the
Downloads section of the product of interest.
9. ORDER LIST
Fire escape protective hood H 900 CO P
Combined fire and industrial accidents escape protective hood H 900 ABEK CO P 117100000
H 900 CO P Restoring kit
H 900 ABEK CO P Restoring kit
Name and description Item code
117110000
117210000
117220000
Pg. 7/24