Led Indicators And Control Panel - Beko BU 1200 Manual Del Usuario

1
LED indicators and control
panel
LED indicators in the front section of
your refrigerator are intended to help
you in monitoring the operation of
your appliance.
Keep your food in the refrigerator in a
safe manner by monitoring and using
these LEDs and controls as explained
below:
Fast Freeze Button (1):
Used to freeze the food fastly.
Compressor may
immediately but after some time
when the button is pressed and this is
quite normal.
Thermostat Setting Button (2):
Used to set your refrigerator
between minimum and maximum
values.
The appliance may go to OFF position
when the knob is adjusted below MIN.
When the green indicator light is OFF,
the appliance is turned OFF also.
Once it is turned OFF (even for
defrosting), please adjust the knob
somewhere above MIN to be sure
that it is turned ON again. When the
appliance is turned ON, the green
indicator will light up.
2
not operate
5
Orange LED (3):
Lights up when the fast freeze
button on the LED panel is pressed. In
this case, your refrigerator operates
continuously.
Press the button again when the
food you would like to fast freeze
comes to the desired temperature and
the orange LED will turn off.
Green LED (4):
Lights up continuously after plugging
in your refrigerator.
Red LED (5):
It warns you by lighting up
continuously when your refrigerators
start to operates, if not enough
cooling effect is obtained, when the
door remains open for a long time and
when excessive food is loaded.
If the red LED lights up continuously
when the conditions stated in the
adjacent column do not exist, then call
our Authorized Service.
19
EN
4 3