Audio Recording - WISEUPSHOP SCT1000 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
All manuals and user guides at all-guides.com
1). A video clip will be generated and saved every 20 minutes automatically.
2). Video Resolution: 1280×960
Video Format: AVI
3). The camera can record video for 13 hours continuously on a full charge.
4). Each video clip will take up about 1GB storage space of the Micro SD card.
5). Loop recording is supported.
3.3. MOTION DETECTION VIDEO RECORDING
3.3.1. Slide the Power Switch to the ON position and then press the Power Button once
to power on the camera. The blue indicator light will come on and stay illuminated,
indicating the camera has entered into standby mode automatically.
3.3.2. Press the Motion Detection Recording Button once to make the camera enter into
motion detection recording mode. The blue indicator light will turn off.
3.3.3. When motion is detected, the blue indicator light will flash for 35 seconds quickly,
then flash twice slowly and turn off; the camera will record a 3-minute video automatically.
3.3.4. Press the Motion Detection Recording Button once to exit motion detection
recording mode. The blue indicator light will come on and stay illuminated, indicating the
camera is back to standby mode.
[Note]:
The camera can run up to 20 hours when no motion is detected all the time.
3.4. CAMERA/STILL PHOTOGRAPHY
3.4.1. Slide the Power Switch to the ON position and then press the Power Button once
to power on the camera. The blue indicator light will come on and stay illuminated,
indicating the camera has entered into standby mode automatically.
3.4.2. Press the Camera Button once to take a photo. Every time you take a photo, the
blue indicator light will flash once.

3.5. AUDIO RECORDING

3.5.1. Slide the Power Switch to the ON position and then press the Power Button once
to power on the camera. The blue indicator light will come on and stay illuminated,
indicating the camera has entered into standby mode automatically.
3.5.2. Press the Audio Recording Button once to start audio recording. The blue indicator
light will flash once and then turn off.

Publicidad

Tabla de contenido
loading

Tabla de contenido