Remote Control Operation - Daitsu APU-DA300 Manual De Usuario

REMOTE CONTROL OPERATION

Remote control operation
The perfect functional regulation need to be completed by remote control.
Lock
Auto
Turbo
Anion
Timer
Electrostatic
Remote control
On/Off
On/Off button
Click the button when it is in standby
mode, and the machine will begin to run.
If you press it again, the machine will stop
running.
Speed
Speed button
When it is in running state, fan speed
will switch according to the following
sequence.
And the speed light of host computer will
fl ash, then you can select the fan speed.
High
Mute
Turbo
Turbo button
When it is in running state, click the button
and the machine will be in this mode.
Plasma opens, and the fan runs in
ultrahigh speed.
High air-fl ow can quickly remove dust in
the air, and it is easy to use in cleaning
the air.
Lock
Lock button
When the unit hasn't been locked, after
pressing this button for more than 2s, the
lock LED is bright and the controller will
be locked.
When the unit has been locked, after
pressing this button for more than 2s, the
unit will be released. Re-energizing after
power off,
it will default to no lock status.
25
All manuals and user guides at all-guides.com
Lum
Timer
Speed
Sleep
Odor
On/Off
Odor
Anion
Sleep
Low
Auto
Electrostatic
Lum
Timer button
If it in power state, every time you press the
button, the timing will change according to the
following sequence. And the timing light of host
computer will fl ash accordingly, then you can
you can select the time.
1 (1 hour) 2 (2 hour)
Cancel 4 (4 hour)
Note: when it is at power on, the timing is for
timed shutdown; when it at power off, the timing
is for timed power on.
Odor button
When it is in running state, click the button,
the machine will be in this mode. The plasma
opens, and the fan will run at the highest
speed.
You can change the fan speed through the
speed button.
Anion button
When it is in running state, click the button, the
machine will be in this mode. The negative ion
opens, and the fan will run at low speed.
You can change the fan speed through the
speed button.
Sleep button
When it is in running state, click the button.
The machine automatically adjust mute fan
speed or low speed according to air quality.
In this mode, the "speed" button is invalid.
Auto button
When it is in running state, click the button.
The machine automatically adjust the on/off
switch of plasma according to air quality.
In this mode, the "speed" button is invalid.
Electrostatic cleaning
The button is invalid on this machine.
Lum Button
After each pressing, the brightness of LED will
be adjusted for once; the brightness of the dust
sensor and odor sensor will circulate as bright-
dark-offbright, while the others will circulate as
bright-dark-dark-bright.