Cleanning And Maintenance - Daitsu APU-DA300 Manual De Usuario

CLEANNING AND MAINTENANCE

Cleanning and maintenance
If it needs dismantling in maintenance, please do it in the following sequence of instructions.
1.
Turn off the machine and unplug
the power cord
2.
Remove the panel
Press the two buckles at both sides of the
bottom of the panel, lift upward, and you can
remove the panel.
3. Remove the dust shelf
components
Use hands to hold the handle, pull forward, and
remove the dust frame components.
4. Take the HIMOP grid out
Pull the handles, pull it out, and take the HIMOP
grid out upward when the sound "click" is heard.
5. Remove the activated carbon fi lter
6.
Install the machine in a reverse
order.
Note:
Do not scratch the surface when remove the
front panel. Take care of the protruding part on
the back, if which is broken the machine will not
operate.
The back of
Protruding part
front panel
27
All manuals and user guides at all-guides.com
Activated carbon
fi lter
Please be careful!
Do not damage it.