Wash And Maintenance - Daitsu APU-DA300 Manual De Usuario

WASH AND MAINTENANCE

Wash and maintenance
In order to maintain the best state, machines should be cleaned regularly.
During the clean process, machines should be unplug, not in wet hands which may cause electric shock and
injuries.
1.
Machine Body Cleaning
Dirt on the main frames and desks where the main frames are placed should be clean as often as possible.
After a long time, dirt would be diffi cult to remove.
• Use soft fabric
Use a dry soft fabric to remove stubborn dirt.
• No volatile substance
Petrol, thinner and abstergent would cause damage to machines.
• No detergent
Chemical composition in the detergent would cause damage to machines.
• No water spraying
Shell and other things should not be fl ushed or washed.
2.
Filter Components Cleaning
When the "cleaning" light on the screen of a machine shines, fi lter components should be cleaned.
• Use a vacuum cleaner fi rst, then use water to wash the components.
• If the components are very dirty, use neutral household detergent, or after using the vacuum cleaner, use a
cleaning rag or a soft-hair brush, then use water to wash until no residuum is left.
• After cleaning, fi x the fi lter components again. Press the mode button for 5 seconds in the holding state,
time remark would be zero cleaning, and the "cleaning" light would turn off.
3.
Sensor
Use a vacuum cleaner to remove the dust on the detection port surface of smell sensor and dust sensor.
AIR PURIFIER
All manuals and user guides at all-guides.com
Running mode
Dust sensor Lock Fan Speed
Mute Low High Turbo Auto
Dust sensor
Timer Clean/Change Odor sensor
Anion Odor Dedust filter
Sleep
Odor sensor
Mode On/off
28