Safety System - Melchioni Family I-WARM ROBOT Manual De Uso

All manuals and user guides at all-guides.com
•
Press the oscillation switch located at the bottom of the unit to start fan oscillation.
•
Press the Oscillation Switch for the second time to stop oscillation.
NOTE: If the Oscillation Switch is on, oscillation function will continue even if the fan/heating
is switched off. To stop oscillation, you must press the Oscillation Switch till oscillation is
stopped. To shut off the entire unit, press the Main Power Button.

SAFETY SYSTEM

•
In the event of abnormal overheating, a safety device will shut down the appliance
automatically and alarm can be heard from the unit.
If overheated:
d. Remove any objects near the product that may cause overheating.
e. Use the product in a well-ventilated area. Keep at least three feet (0.9 meters) of space
on all sides of the product to allow adequate air circulation.
f. If you still notice the same defect above mentioned, remove the plug from the
socket and call the customer service department.
•
If there is a switch under the bottom of your product, the unit will be shut off
automatically when it's tilt over.
•
The unit can be Switched OFF only by pressing the POWER switch.
WARNING: Ensure the plug fits tightly in power outlet. A loose fit will cause
overheating and damage the plug and socket.
NOTE: The plug and power cord may feel warm during normal usage.
MAINTENANCE
The appliance only needs regular cleaning on the outside.
•
Before you clean the appliance, switch the heater off. Remove the plug from socket
and wait until the heater has cooled down.
•
Use a damp cloth to wipe off the fan heater housing.
•
Do not use water, detergents, abrasive cleaning liquids or chemical agents (Alcohol,
Gasoline etc...) to clean the appliance.
•
The motor is factory lubricated for life, and will require no further lubrication.