Electrical Connection; Mode Setting - Melchioni Family I-WARM ROBOT Manual De Uso

All manuals and user guides at all-guides.com
AWG minimum size and rated not less than 2500 watts.
KNOW YOUR FAN HEATER

ELECTRICAL CONNECTION

Before inserting the plug in an electrical outlet, check carefully to make sure that the
voltage in your home's electrical system matches the voltage indicated on the appliance
and that the socket and main feed are of a size sufficient to power this appliance.
OPERATION
•
Insert the plug into a main socket and turn your heater ON with the POWER switch.
The touching screen will highlight and display the current temperature, touching
buttons (TIMER, DOWN, UP, MODE) and the function mode (FAN, LOW, HIGH).
•
Before any button on the screen is touched, the unit will be on status of standby.
•
10 seconds after the unit is powered on and/or any function is set, the touching screen
will return to dull color automatically.

MODE SETTING

1
1.Touching
Screen
2.Power Switch
2
3.Pedal
Oscillation Switch
3