Carrier XCT 7 40VA010T7FAQEE Manual Del Propietario Y De Instalación página 11

Installation procedure
Thick cement plate
Lifting tools
Connection
kit
Less than 1m
See Fig.1 & Fig.2 to install the lifting bolts and the hoisting tools.
• Use lifting bolts of M8~M10 size.
3. Installation of the connection kit
Use parts and components specified for installing the installation components.
(1) Change the installation direction of electric box according to the specifications in the following steps : (see Fig.1)
Remove the cover of the electrical appliance box (2 screws)

Remove the electrical appliance box (2 screws)

Remove the top plate (4 screws)

Change the direction of wiring (electric valve coil) between the equipment and the electrical appliance box

Rotate the unit by 180° to install the top plate

 Install the electrical appliance box
Install the cover of the electrical appliance box.

Foundation bolt
Long nuts or turnbuckle
Lifting bolt
Less than 1m Note : All the parts indicated in the figure have to be
purchased locally.
Fig. 2

Electrical appliance removal
Fig. 1
9