Uline H-5784 Manual De Instrucciones página 3

4. Use these holes to fasten the safe to the floor. Drill
the appropriate diameter and depth of pilot holes
into the floor depending on the type of hardware
being used and the type of floor surface.
(See Figure 3)
Figure 3
5. Secure the safe with fasteners and replace
carpeting.
PAGE 3 OF 9
USAGE CONTINUED
BACKUP KEY
A backup key has been provided in case security code
is forgotten or lost. To open the safe using the backup
key, follow the steps below:
1. Remove the cover by pressing the tab and turning
the cover. (See Figure 4) The lock can hang by the
connecting cable while unlocking the safe.
2. Insert the key in the key hole and turn clockwise
1/4 turn (until stopped) in order to unlock the safe.
Rotate the handle and open the door.
3. Keep the door open until you have entered a new
security code. Before entering new code, remove
the key and screw the cover back in place.
4. Enter new security code following the instructions on
page 2.
1-800-295-5510
uline.com
Figure 4
1020 IH-5784