decorflame QCM525-47BDC Manual Del Usuario página 6

A S S E M B LY I N S T R U C T I O N S
NOTE: If the KD SCREWS do not fit during
assembly, loosen the 2 screws to adjust the
PLASTIC CONNECTOR until the parts/KD
SCREWS can be installed.
Step 2: Attach the LEFT SMALL [G] to LEFT
FRONT [E] with 2 LONG KD SCREWS [M]. At-
tach the RIGHT SMALL [H] to RIGHT FRONT [F]
with 2 LONG KD SCREWS [M]. See Fig. 2
Step 3: Attach the SIDE [D] to LEFT FRONT
[E] and RIGHT FRONT [F] with 6 LONG KD
SCREWS [M] as shown in Fig. 3
Step 4: Attach the LEFT SIDE [D, E and G]
and RIGHT SIDE [D, F and H] to the BASE [B]
using 4 LONG KD SCREWS [M]. See Fig. 4
Step 5: Mount the LEFT DECORATIVE [J] to
LEFT FRONT [E] with 3 LONG KD SCREWS
[M]. Mount the RIGHT DECORATIVE [K] to
RIGHT FRONT [F] with 3 LONG KD SCREWS
[M]. See Fig. 5
Fig. 2
Step 6: Attach MID-FRONT [I] to the UPPER
Fig. 3 FRONT [C] with 2 LONG KD SCREWS [M] as
shown in Fig. 6
6
Fig. 4
Fig. 5