Hawke 46100 Manual Del Usuario página 10

"Up" and "Down" buttons to move between PIR (motion detection), TL (time-lapse) and
PIR+TL (both) – Press "OK" on PIR+TL – Use the "Up" and "Down" buttons to edit the hours
– "OK" – Use the "Up" and "Down" buttons to edit the minutes – Press "OK" to confirm.
DUTY
Sets the camera to work during a specific time of the day. This will affect all three working modes
(PIR (motion detection), TL (time-lapse) and PIR+TL (both)). The default duty time is 24 hours
per day (from 00:00 to 23:59). DUTY – "OK" – Start Time: use the "Up" and "Down" buttons to
edit the hours – "OK" – Use the "Up" and "Down" buttons to edit the minutes – "OK" – Stop
Time: use the "Up" and "Down" buttons to edit the hours – "OK" – Use the "Up" and "Down"
buttons to edit the minutes – Press "OK" to confirm.
SPECIFICATION
Product Name....................................................................10MP Nature Camera
Model Number....................................................................46100
Image Sensor Type.............................................................1/2.5 Inch CMOS
Megapixels...........................................................................10MP
Lens Aperture.....................................................................Day: F3.0 / Night: F2.0
Camera Lens Sight Angle..................................................55 Degrees
Trigger Speed......................................................................<0.8 Seconds
Number of IR LEDs...........................................................21 LEDs
10