Hawke 46100 Manual Del Usuario página 7

the coverage area. Adjust the camera's position as needed. Press the "Setup" button to return to
the menu.
VIEW MEDIA ON COMPUTER
Push the power switch into the "ON" position. Connect the camera to your computer with the
USB lead supplied, your computer will recognize the camera as mass storage. The camera's display
will show STOR to represent storage mode. You can now view, move or delete the media on the
camera's SD card. Ensure the power switch is in the "OFF" position before disconnecting the
camera from your computer.
VIEW MEDIA USING CARD READER
Depress the SD card and remove it from the camera. Insert the SD card into a card reader (not
supplied). You can now view, move or delete the media on the SD card.
MENU
DATE
Setting the date before use will ensure the correct month, day and year are recorded on the image.
DATE – "OK" – Use the "Up" and "Down" buttons to edit the year – "OK" – Use the "Up"
and "Down" buttons to edit the month – "OK" – Use the "Up" and "Down" buttons to edit
the day – Press "OK" to confirm.
7