Hawke 46100 Manual Del Usuario página 8

TIME
Setting the time before use will ensure the correct time is recorded on the image or video. TIME
– "OK" – Use the "Up" and "Down" buttons to edit the hours – "OK" – Use the "Up" and
"Down" buttons to edit the minutes – Press "OK" to confirm.
DELAY
Camera delay is used to set the amount of time that the camera will sleep between taking images
after the PIR has triggered. This setting ranges from 5 seconds to 10 minutes. The default delay is
5 seconds. DELAY – "OK" – Use the "Up" and "Down" buttons to edit the minutes – "OK" –
Use the "Up" and "Down" buttons to edit the seconds – Press "OK" to confirm.
FORMAT
Deletes all photos and videos on the memory card. Displays total amount of images on SD card.
FORMAT – "OK" –Use the "Up" and "Down" buttons to move from FO (format) to NO
(cancel) – Press "OK" to confirm.
MODE
1P (1 image): Sets the image quality for single photos from 5MP to 10MP. MODE – "OK" – Use
the "Up" and "Down" buttons to move between 1P (1 image), 3P (3 images) and MOVIE – Press
"OK" on 1P – Use the "Up" and "Down" buttons to move between HI (10MP) and LO (5MP) –
Press "OK" to confirm.
8