Hawke 46100 Manual Del Usuario página 9

3P (3 images): Sets the image quality for burst photos from 5MP to 10MP. MODE – "OK" – Use
the "Up" and "Down" buttons to move between 1P (1 image), 3P (3 images) and MOVIE – Press
"OK" on 3P – Use the "Up" and "Down" buttons to move between HI (10MP) and LO (5MP) –
Press "OK" to confirm.
MOVIE: Sets the capture mode to record videos and duration from 5 to 30 seconds. MODE –
"OK" – Use the "Up" and "Down" buttons to move between 1P (1 image), 3P (3 images) and
MOVIE – Press "OK" on MOVIE – Use the "Up" and "Down" buttons to edit the duration from
05 to 30 seconds – Press "OK" to confirm.
STATUS
PIR (motion detection): The camera works on PIR activation. STATUS – "OK" – Use the "Up"
and "Down" buttons to move between PIR (motion detection), TL (time-lapse) and PIR+TL
(both) – Press "OK" on PIR to confirm.
TL (time-lapse): The camera takes an image at certain intervals of time. The interval time ranges
from 1 minute to 24 hours. STATUS – "OK" – Use the "Up" and "Down" buttons to move
between PIR (motion detection), TL (time-lapse) and PIR+TL (both) – Press "OK" on TL – Use
the "Up" and "Down" buttons to edit the hours – "OK" – Use the "Up" and "Down" buttons
to edit the minutes – Press "OK" to confirm.
PIR+TL (both): The camera uses both PIR and time-lapse modes. STATUS – "OK" – Use the
9