Decommissioning; Disassembly And Disposal; Returning Devices; Technical Data - SICK PowerProx Mini Instrucciones De Uso

8
MAINTENANCE
9

Decommissioning

9.1

Disassembly and disposal

9.2

Returning devices

10

Technical data

10.1 Technical data
Sensing range
Sensing range max.
Distance value measuring range
Distance value-resolution
16
NOTE
Static charge may cause dust particles to stick to the light emission window. This effect
can be avoided by using an anti-static glass cleaner in combination with the SICK lens
cloth (can be obtained from www.sick.com).
NOTE
If the light emission window is scratched or damaged (cracked or broken), the device
must be replaced. Contact SICK Service to arrange this.
Cleaning the housing
In order to ensure that the heat produced by the internal power loss is adequately dissi‐
pated, the housing surface must be kept clean.
Disassembling the device
1. Switch off the supply voltage to the device.
2. Detach all connecting cables from the device.
3. If the device is being replaced, mark its position and alignment on the bracket or
surroundings.
4. Detach the device from the bracket.
Disposing of the device
Any device which can no longer be used must be disposed of in an environmentally
friendly manner in accordance with the applicable country-specific waste disposal regu‐
lations. As it is categorized as electronic waste, the device must never be disposed of
with household waste.
Do not dispatch devices to the SICK Service department without consultation.
b
NOTE
To enable efficient processing and allow us to determine the cause quickly, please
include the following when making a return:
Details of the contact person
■
Description of the application
■
Description of the fault that occurred
■
Speed Distance
50 mm ...1000 mm 100 mm ...1300 mm
1
90 mm...1000 mm 90 mm ...1300 mm
2
90 mm ... 1000 mm 90 mm ... 1300 mm
1
1 mm
1
2
1
8022570 | SICK
Subject to change without notice