Alcad GRF-204 Manual Del Usuario página 16

V I D E O P O R T E R O E L E C T R Ó N I C O - V I D E O D O O R E N T R Y S Y S T E M S - V I D É O P O R T I E R É L E C T R O N I Q U E
3
Make the electrical connections
(consult wired diagrams). Check the
adjustment (consult page 18).
MONITOR - MONITEUR - MONITOR
1
Connect the monitor connector to
the connection bracket.
3
While holding this position, push the
monitor downwards.
2
Starting from the position shown in
the illustration (i.e. with the upper
part of the monitor approximately
20mm above the connections
bracket), move the monitor closer to
the connections bracket in such a
way that the upper fixing tongues
of the bracket clip into the guides in
the base of the monitor (1).
4
Connect the cord between the base
of the monitor and the receiver.