Horizon Global CQT76521 Instrucciones De Instalación página 4

1. Partially remove rear bottom appearance panel - Use T10 torxbit to remove (2) plastic screws (with clips) from front end of rear bottom appearance panel. Use
T25 torxbit to remove (12) screws from front end of rear bottom appearance panel.
2. Loosen wheel well liner – Use T25 torxbit to remove (4) screws from the
driver side wheel well liner. Repeat this process for passenger side.
©2021 Horizon Global™ Corp - Printed in Mexico
3. Loosen wheel well trim – Using plastic trim tools partially remove wheel well
trim from driver side. Gently pull the wheel well liner back. Use T20 torxbit to
remove (2) screws from fascia connection point. Repeat steps for passenger side.
Sheet 4 of 18 76521NP 7-14-21 Rev. A