Horizon Global CQT76521 Instrucciones De Instalación página 6

7. Trim fascia – Using a tape measure, marker, and utility knife, cut a 1.0"x6.5" notch in the bottom of fascia. See Figure 2. Note: Be sure area is clear of all electrical
wiring before trimming. NOTE: Trim begins on left side of existing opening in fascia.
Trim area
1.0"
6.5"
Figure 2
8. Reinstall the wiring harness, fascia, fasteners, wheel trims and bottom appearance panel removed in Step 1-5.
©2021 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 18 76521NP 7-14-21 Rev. A