Identification Of Components; Safety Devices - Comet K Steel S Manual De Instrucciones, Uso Y Mantenimiento

Hidrolavadoras electricas de aqua fria;

Ocultar thumbs Ver también para K Steel S:

Manual de instrucciones (132 páginas)

100

101

102

103

104

105

106

107

108

Contenido

109

Tabla de contenido

Idiomas disponibles

Refer to Figures 1 to 4:

1. ON/OFF Master switch

2. Handle

3. Lance support

4. Warning plates. Inform on residual risks and

PPE to be used

5. Identification plate. Indicates the serial number,

guaranteed sound power value (in compliance

with Directive 2000/14/EC) and main technical

characteristics

6. Power cable

7. Delivery hose/power cable support

8. Pressure adjustment knob

9. Pressure indicator

10. Oil plug with vent and dipstick

11. Foot

12. Water outlet fitting

13. Water inlet fitting

14. Detergent suction connection

• Automatic reset thermal protector.

Device that stops the operation of the high pressure washer if the electric motor overheats.

In this case, proceed as follows:

- move the master switch (1) to "0" position and remove the plug from the power socket;

- press the spray gun lever (15), so as to release any residual pressure;

- wait 10÷15 minutes for the high pressure cleaner to cool down;

- make sure the instructions for connection to the power supply are complied with (refer to the

Instruction manual – Safety precautions), with special reference to the extension used;

- fit the plug back in the socket and repeat the start procedure described in the paragraph "Operation".

• Pressure unloader/regulation valve.

Valve, suitably calibrated by the Manufacturer, for regulating work pressure by means of the knob (8)

and that allows the pumped fluid to return to pump suction thus preventing the onset of dangerous

pressures, when closing the spray gun or when trying to set a pressure that is above the maximum

permitted values.

• Spray gun lever lock device.

Safety stop (16) for locking the spray gun (17) lever (15) in the closed position so it cannot be started

accidentally (Fig. 4, position S).

Make sure the following are inside the pack of the product you have purchased:

• high pressure cleaner;

• handle;

• high pressure delivery hose;

• spray gun;

• lance hose;

• bag of accessories with:

- instruction manual - safety precautions;