Uline H-2673 Guia De Inicio Rapido página 2

Figure 1
Figure 2
Figure 3
PAGE 2 OF 6
ASSEMBLY
1. Verify all parts are present before beginning.
Hardware is attached to cross braces.
2. Flip the tabletop upside down. Take one leg
at a time and loosely attach to the tabletop with
the leg braces on an inside mount, using one bolt,
washer and one nut. (See Figure 1)
3. Before tightening the bolts, insert cross brace
and bolt to the table frame using one bolt, one
washer and one nut. (See Figure 2)
4. Flip the table upright and loosely attach the two
seats to the legs with the leg braces having an inside
mount, using one bolt, two washers and one nut.
(See Figure 3)
5. Ensure that the tabletop and seats are level, then
tighten each bolt, finishing with the cross braces.
NOTE: H-2301 mounting hardware sold
separately.
1-800-295-5510
uline.com
0321 IH-2673