D- Setting/Using - SCS Sentinel HWay Instrucciones De Uso E Instalación

D- SETTING / USING D- SETTING / USING
The automatism is equipped with a Wi-Fi module that will allow you to use and configure your automatism
from your smartphone. You can also make the adjustments in a traditional way. Both adjustments will be
differentiated as below :
Traditional settings
D1- Wi-Fi module
Connectors
towards PCB
If you need to program the module, press the P button and
follow the steps described on D2.
• LED's detail :
Blue : The LED will flash during the Wi-Fi pairing, and will
stay lit when pairing is successful.
Green : The LED will flash if the Wi-Fi module will receive
a signal from the app.
If Wi-Fi is off, the green LED will flash continuously and will turn off
when Wi-Fi will be connected again.
Red : Disconnected system or incorrect password
• The Wi-Fi range between the box and the Wi-Fi module
is 30 m in free field.
D2- Automatism and app installation
Download the H'Access
1
app (available on iOS and
Android)
H'Access
LED indicators
Register with a
2
password and an ID
Settings via smartphone
P button :
Default settings: press for 5 seconds, unplug
and reconnect the wire.
Free-field range
30 m
100%
80%
60-70%
50-70%
20-50%
<10% Metal
Add your automatism by
3
clicking on
Free-field
Wood, glass
Plasterboard
Stone
Concrete
+
EN
33