Hitachi 70HL7300 Manual Del Usuario página 24

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 340
Equalizer
Bass Gain
DTS DRC
Sound Mode
Digital Out
Headphone
Balance
Reset
Network Menu Content
Network Type
Scan Wireless
Networks
Disconnect
Press WPS on your
wifi router
Internet Speed Test
Advanced Settings
Networked Standby
Mode
Note: For detailed information on the options of this menu refer to the Connectivity section.
Network Menu Content
Network Type
Internet Speed Test
Advanced Settings
Note: For detailed information on the options of this menu refer to the Wired Network Connection section.
Selects the equalizer mode. Custom settings can be made only when in User mode.
Controls the bass gain level. Use Left or Right button to set.
Dynamic Range Control provides gain adjustment of the source to maintain suitable
audible range at both low and high playback levels. It will function only if the source
audio format is DTS. Enable or disable the DTS DRC by setting as On or Off.
You can select a sound mode (if the viewed channel supports).
Sets digital out audio type.
Sets headphone volume. This option will not be available if the Sound Output option
is set as Lineout.
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
Sets sound balance. This feature will be activated if Sound Output option is set as TV
or Headphone Only. Balance item adjusts the balance level of the TV speakers and
headphones together.
Resets some of the sound settings to factory defaults.
Disable the network connection or change the connection type.
Start a search for wireless networks. This option will be available if the Network Type
is set as Wireless Device.
To disconnect from a wireless network and delete your saved wireless network profile (if
previously saved), highlight this option and press OK. This option will not be available
if you did not connect to a wireless network. Refer to Connectivity section for more
information.
If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press OK. Go to your modem/router device and press the
WPS button on it to make the connection. This option will be available if the Network
Type is set as Wireless Device.
Start a speed test to check your connection bandwidth. The result will be displayed on
the screen when finished.
Change the IP and DNS configurations of your TV.
Enable or disable this feature by setting it as On or Off.
Disable or enable the wired network connection.
Start a speed test to check your connection bandwidth. The result will be displayed on
the screen when finished.
Change the IP and DNS configurations of your TV.
English - 23 -

Publicidad

Tabla de contenido
loading

Tabla de contenido