Blade Maintenance - sunjoe HJ605CC Manual Del Operador

2. Pay attention when performing work close to trees and
bushes. The cutting device can damage sensitive bark,
and damage fence posts.
3. Do not move the product too fast as this will result in
ineffective cutting and possible damage.
4. Walk, never run, when using the product with the
telescope pole.
5. Cut repeatedly from up and down in layers when the grass
is very high (Fig. 30).
Fig. 30
6. Keep the cutting device at an angle of about 10° to the
ground when shearing. Avoid touching the ground as this
can ruin the lawn and damage the product.
7. Let the cutting device do the work. Let it work at its own
pace, never press it into the area to be cut.
8. Carefully maneuver the product around objects, such as
trees and bushes, ensuring it does not come into contact
with them. Avoid that the cutting device comes in contact
with sensitive plants.
9. Our Environment – At Snow Joe
about the environment and consider what we may do to
protect it. If you share this concern, you may already be
aware of the suggestions below; if not, please consider
them as a small step in protecting our future.
Don't throw your clippings in a trash bag; where possible,
dispose of your garden waste in a landfill. Alternatively,
many communities provide a collection point where you
can dispose of your garden waste in an environmentally-
friendly manner.
Maintenance
m
WARNING!
Always switch the product off and let the
product cool down before performing inspection, maintenance
and cleaning work.
1. Keep the ventilation vents of the tool clean at all times. If
possible, prevent foreign matter from entering the vents.
2. If the enclosure of the trimmer requires cleaning, do not
use solvents to clean it. Only use a moistened soft cloth.
Never let any liquid get inside the tool; and never immerse
any part of the tool into a liquid.
3. The blade rail should be cleaned and treated with light
machine oil or spray lubricant (such as WD40, CRC 5.56
or RP7) after each use. When a job lasts for a long period
+ Sun Joe , we care
® ®
14
of time, it is recommended that the blade rail also be
treated with spray lubricant at regular intervals during
operation.
4. Inspect the product before each use for worn and
damaged parts. Do not operate it if you find broken and
worn parts.

Blade Maintenance

To ensure years of efficient and trouble-free operation, blade
cleaning should be performed if sap and debris have built-
up, or if you live in an area where the soil is sandy. Cleaning
unusually heavy deposits may require removal of the blades.
NOTE: Snow Joe
+ Sun Joe
®
any damage or injuries caused by repair of the trimmer by an
unauthorized person or by mishandling of the trimmer.
1. Keep the cutting blades clean and free of debris. Remove
trimmings.
2. Apply a small amount of suitable lubricant on the blades
to retain a good cutting performance (Fig. 31).
Fig. 31
3. Keep the blades sharp. Have a worn or damaged cutting
device replaced with a new one of the same type by a
qualified specialist. Spare parts may be ordered online at
sunjoe.com or via phone by contacting the Snow Joe
Sun Joe customer service center at 1-866-SNOWJOE
®
(1-866-766-9563).
Storage
When the tool will not be used for several months, it is ideal
to leave the battery connected to the charger. For optimal
storage, proceed as follows:
• Fully charge the battery.
• Clean the product as describe above.
• Assemble the blade covers over the blades (Fig. 32).
will not be held responsible for
®
+
®