ENGLISH
All manuals and user guides at all-guides.com
•
For best results dampen the skin with water and apply shower gel or body
wash.
•
Turn the unit on to the LOW speed setting.
•
Applying gentle pressure sweep the brush over the skin targeting the
desired areas. If required the Exfoliating Brush can also be operated on the
HIGH speed setting.
, Note: The Exfoliating Brush is not to be used on the face or sensitive areas.
•
Can be used on wet or dry skin.
, PEDICURE HEAD
•
The Pedicure Head spins to gently remove hard, dry skin from the feet.
•
Ensure the epilator is switched off.
•
Press the head release button and remove the Epilator Head.
•
Attach the Pedicure Head until it clicks into place.
•
Turn the unit on to the LOW speed setting.
•
Applying gentle pressure glide the roller over the hard skin you wish to
remove. Do not press too hard.
•
After 2-3 seconds, stop and check the skin. Repeat this process until you have
the desired effect. If required the Pedicure Head can also be operated on the
HIGH speed setting.
, Note: The Pedicure Head is only designed for use on the feet. DO NOT use on
any other part of the body.
•
Do not use on wet skin.
•
Do not use in the same area for more than 2-3 seconds at a time.
, CAUTION
•
For your protection your epilator may slow down or even stop if pressed too
firmly against the skin.
•
Do not use the Epilating Head on irritated skin or skin with varicose veins,
rashes, spots, moles or wounds without consulting a doctor. People with
reduced immune response eg: during pregnancy, or people who suffer from
diabetes mellitus, haemophilia or immunodeficiency should also consult
their doctor before using this product.
•
Do not use the Exfoliating Brush or Pedicure Head on broken, sore or irritated
skin or on warts or any other protrusions.
•
For hygiene reasons do not let another person use your epilator. It is
recommended for use by one person only.
8