Important Safety Information - Nemaxx FL10-VdS Manual Del Usuario

Tabla de contenido

Publicidad

IMPORTANT SAFETY INFORMATION

1. The test button accurately tests smoke alarm device functions.
Do not use any other test method.
Test smoke alarm device weekly to ensure proper operation.
2. If you're sure it isn't a really alarm, open windows or fan the air around smoke alarm
device for silence it
3. This smoke alarm device should be installed only by a licensed, qualified electrician.
Observe and follow all local and national electrical and building codes for installation.
4. This smoke alarm device is designed to be used inside a single family only.
In multifamily buildings, each individual living unit should have its own smoke alarm
devices. Do not install in non-residential buildings.
And this smoke alarm device is not a substitute for a complete alarm system.
5. Install a smoke alarm device in every room and on every level of the home.
Smoke may not reach the smoke alarm device for many reasons.
For example, if a fire starts in a remote part of the home, on another level, in a chimney,
wall, roof, or on the other side of a closed door, smoke may not reach the smoke alarm
device in time to alert household members.
A smoke alarm device will not promptly detect a fire except in the area or room in which
it is installed.
6. Smoke alarm device may not alert every household member every time.
The alarm horn is loud in order to alert individuals to a potential danger.
However, there may be some circumstances where a household member may not hear
the alarm (i.e. outdoor or indoor noise, sound sleepers, drug or alcohol usage, the hard
of hearing, etc.).
If you suspect that this smoke alarm device may not alert a household member, install
and maintain specialty smoke alarm devices. Household member must hear the alarm's
warning sound and quickly respond to it to reduce the risk of damage, injury, or death
that may result from fire.
If a household member is hard of hearing, install special smoke alarm devices with lights
or vibrating devices to alert occupants.
7. Smoke alarm devices can only sound their alarms when they detect smoke or detect
combustion particles in the air. They do not sense heat, flame, or gas. This smoke alarm
device is designed to give audible warning of a developing fire.
However, many fires are fast - burning, explosive, or intentional, and others are caused
by carelessness or safety hazards. In this circs, Smoke may not remake the unit alarm
QUICKLY ENOUGH to ensure safe escape.
8. Smoke alarm devices have limitations. This smoke alarm device is not foolproof and is
not warranted to protect lives or property from fire.
Smoke alarm devices are not a substitute for insurance. Homeowners and renters
should insure their lives and property.
In addition, it is possible for the smoke alarm device to fail at any time. For this reason,
you must test the smoke alarm device weekly and replace unit every 10 years.
EN
3
Version: 2.0
14.07.2016

Publicidad

Tabla de contenido
loading

Tabla de contenido