Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (10F) into the large holes in the ENDS (A
and B). Repeat this step for the LEFT END (C), UPRIGHT (D),
MODESTY PANEL (G), and SHELVES (H and I).
Push a HIDDEN CAM (1F) into the DRAWER BRACE (M62).
å
Then, insert the metal end of a CAM DOWEL (2F) into the
HIDDEN CAM.
Do not tighten the HIDDEN
CAMS in this step.
Arrow
1F
Page 6
10F
(18 used)
M62
2F
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Do not tighten the TWIST-LOCK®
FASTENERS in this step.
A
Arrow
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
414836
B
www.sauder.com/services
Publicidad
