Simon K 176 288 Instrucciones De Servicio página 43

4) Leaks
Seals are worn or damaged
Some parts are torn or worn
5) The forks lower without the outlet valve functioning
The outlet valve (3142A) does not
close properly due to contamination
in the oil
Air is getting into the oil
Seals are worn or damaged
The outlet valve is maladjusted
VI. Specification
Capacity
Max. fork height
Min. fork height
Fork length
Overall width of the forks
Fork width, individual
Diameter of load wheels
Diameter of control wheel
Note: All the information provided here is based on the data available at the
time of going to press. The manufacturer reserves the right to modify this
product at any time and without prior notice without this giving rise to
liability claims. Please always remember this and check the situation at
the time.
* * * * * * * * * * * * * * * * * * * * * *

Replace the seals

Check and replace these parts

Replace the oil with fresh oil

Remove the oil (see III.2)

Replace the seals

Adjust the setting screw (3133B)
2,500 kg
200 mm
85 mm
1,150 mm
550 mm
155 mm
80 mm
180 mm