Cisco 300 Serie Guia De Inicio Rapido página 12

All manuals and user guides at all-guides.com
Returning the Device to the Factory
5
Default Settings
To use the Reset button to reboot or reset the managed switch, do the
following:
• To reboot the managed switch, press the
seconds.
• To restore the managed switch configuration to the factory default
settings:
1. Disconnect the managed switch from the network or disable all
DHCP servers on your network.
2. With the power on, press-and-hold the
10 seconds.
300 Series Managed Switches
Reset button for less than 10
Reset button for more than
12