universalblue UCEF90101-20 Manual De Instrucciones página 31

5-2. Slide the reflector plate over the reflector panels.
Insert a M6 X 10 (II) screw. Slide a washer Φ 6 over the thread of the
M6 X 10 (II) screw and screw on the cap nut (JJ) loosely. Repeat the
procedure to complete the assembly of the four sections. Fully
tighten all screws.
STEP 6
6-1. - Place 3 studs with 6 washers on the top of the heater.
6-2. - Place the top cover within the studs and fix it.
31