Use Of Gas On The Outdoor Stove - universalblue UCEF90101-20 Manual De Instrucciones

STEP 7
7-1. Remove the 4 screws from the burner.
7-2. Place the gas hose through the post.
7-3. Attach the burner(with the top cover already
attached) to the bar with the 4 screws.
7-4. Check that the burner has been fixed to the
bar correctly and that all the screws are
tightened correctly.
STEP 8
8-1.Bring up the tank shell and support it on the
supports.
8-2. Connect the regulator to the gas cylinder and
tighten with the Wrench.
8-3. Connect the end thread of the gas inlet hose
to the regulator.
8-4. Place the gas cylinder in the holder.

5. USE OF GAS ON THE OUTDOOR STOVE

Gas requirements
• Use only propane or butane gas.
• The hose and pressure regulator kit to be used must comply
with local standard codes and European regulations.
• The installation must comply with local requirements.
• A dented, rusty, or damaged propane cylinder can be
dangerous. Never use a propane cylinder in this condition. In
that case, contact the gas cylinder supplier quickly.
• Never connect an unregulated gas cylinder directly to the
appliance.
32