Basic Settings; How To Change A Setting; Setting Mode - IKEA HYGIENISK Manual Del Usuario

ENGLISH
option increases the wash temperature and
duration.
Gentle / Glass
Gentle / Glass prevents delicate load,
glassware in particular, from damaging. The

Basic settings

Num‐ Setting
Setting
ber value
1 Water softener
2 Rinse aid emp‐ 1d (on) / 0d (off)
ty notification
3 End sound 1b (on) / 0b (off)
4 Auto door open 1o (on) / 0o (off)
5 Key tones 1F (on) / 0F (off)
6 Latest pro‐ 1H (on) / 0H (off)
gramme selec‐
tion
7 Display on floor 1C (on) / 0C (off)
1) Factory setting.
2) Do not use salt at this level.

Setting mode

Button
Previous button. Press to switch between the ba‐
sic settings and to change their values.
OK button. Press to enter the selected setting
and to confirm changing its value.
Next button. Press to switch between the basic
settings and to change their values.
Water hardness
mmol/l German de‐
grees (°dH)
10 8.4 - 9.0 47 - 50
9 7.6 - 8.3 43 - 46
8 6.5 - 7.5 37 - 42
7 5.1 - 6.4 29 - 36
6 4.0 - 5.0 23 - 28
1)
3.3 - 3.9 19 - 22
5
4 2.6 - 3.2 15 - 18
3 1.9 - 2.5 11 - 14
2 0.7 - 1.8 4 - 10
2)
<0.7 <4
1
Description
To download the full version visit www.ikea.com
option prevents rapid changes in the
dishwashing temperature of the selected
programme and reduces it to 45 °C.

How to change a setting

1. Press and hold simultaneously
for about 3 seconds to enter
setting mode.
• The lights:
• The display shows the current value
of the first available setting.
2. Press Previous or Next to select the
setting.
The display shows the current setting value
(a digit and the dedicated letter).
3. Press OK to enter the setting.
The current setting value flashes.
4. Press Previous or Next to change the
value.
5. Press OK to confirm the setting value.
• The new setting value is saved.
• The appliance returns to the basic
settings list.
6. Press and hold simultaneously
for about 3 seconds to exit the
setting mode.
The appliance switches to the programme
selection.
TimeBeam
TimeBeam displays the following
information on the floor below the appliance
door:
• The programme duration when the
programme begins.
• 0:00 and CLEAN when the programme is
complete.
• DELAY and the countdown duration when
the delay start begins.
• An alarm code when the appliance has a
malfunction.
and
, and are on.
and
7