Publicidad
10
10
Maximum
Arrow
210 degrees
Minimum
190 degrees
First, fi ll the hole in the edge of the RIGHT FRONT/LEFT REAR LEG (I) on the RIGHT END (A) 1/4 to 1/2 full with GLUE (8M).
Then, insert a WOOD DOWEL (15F) into the hole. Wipe away the excess GLUE.
Now, fill the hole in the STOP MOLDING (P) 1/4 to 1/2 full with GLUE (8M).
Fasten the RIGHT END (A) to the TOP (D), BOTTOM (E), and SHELF (F). Tighten six HIDDEN CAMS.
NOTE: Be sure the WOOD DOWEL (15F) in the RIGHT FRONT/LEFT REAR LEG (I) inserts into the hole in the STOP
MOLDING (P). Wipe away the excess GLUE.
Page 14
Fill the holes 1/4 to 1/2 full with GLUE.
E
www.sauder.com/services
Caution
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
P
D
F
I
A
15F
8M
414239
Publicidad
