About Discs - Disney W1320PTVD Guia Del Usuario

ABOUT DISCS

The region number for this DVD Player is :
See the following page for information regarding region numbers.
PLAYABLE DISCS:
The following discs can be played back on this DVD player:
DISC TYPES:
DVD
Data on most DVDs is divided into sections called "titles"
and then into subsections called "chapters", each of which
is given a title or chapter number. Some features of this
DVD player will not operate with some DVD discs as they
are preset. If a function you selected does not run as
desired, refer to the manual accompanying the DVD disc.
AUIDO CD
Data on an audio CD is divided into sections called
"tracks", each of which is given a track number.
IMPORTANT:
It is important that you read the manual that accompanies the DVD discs, as there are features
that are on the DVD player that cannot be used with certain DVDs. There are also extra features on
the DVD disc that are different for each DVD disc, so they are not explained in this owner' s manual.
This player conforms to the NTSC and PAL color systems. However, if you are in the
USA, leave this setting on NTSC. If incorrectly set to PAL, the TV picture will roll
vertically. In this case, simply turn the DVD off, and then back on.
Notes on Copyright:
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public and rent
copyrighted material without permission. DVD video discs are copy protected, and any recordings
made from these discs will be distorted. This product incorporates copyright protection technol-
ogy that is protected by method claims of certain U.S. patents and other intellectual property rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Region Management Information:
This DVD Player is designed and manufactured to respond to the Region Management Information
that is recorded on a DVD disc. If the Region number described on the DVD disc does not corre-
spond to the Region number of this DVD player, this DVD player cannot play that disc. You may not
be able to play back some DVD video on this player if they are purchased from outside your
geographic area or made for business purposes. When you try to playback an unauthorized disc,
"Region Error" appears on the TV screen.
24
W1320PTVD MIT IC +MTK1389R12197-20.p65 24-25
TROUBLESHOOTING
Your television is designed to give you trouble-free performance for many years. If you have
a problem with your TV, try the solutions listed below.
There is no picture or sound, or the TV doesn't turn on.
•
Make sure the TV is plugged in.
•
Make sure the MUTE is not set.
•
Make sure the POWER is on.
•
Make sure a headphone is not inserted.
•
If there is neither picture nor sound, unplug the TV for 30 seconds, then plug it in and try
again.
There is no picture or sound on some UHF channels.
•
Try another station. If the other stations are OK, it may be a station problem.
•
Check that the antenna is connected & adjusted correctly, in good working order and has
no broken wires.
•
See if anything is interfering with the antenna signal.
•
Make sure the AIR/CABLE setting is correct.
The sound is OK, but the picture is poor.
•
Try another station. If the other stations are OK, it may be a station problem.
•
Check that the antenna is connected & adjusted correctly, in good working order and has
no broken wires.
There is poor reception on some channels.
•
Try another station. If the other stations are OK, it may be a station problem.
•
Check that the antenna is connected & adjusted correctly, in good working order and has
no broken wires.
Cannot tune to a cable channel.
•
Make sure the AIR/CABLE setting is correct.
•
The channel may not be programmed into memory.
The picture rolls, slants, shows lines, is grainy, has poor color, or has ghosts.
•
Try another station. If the other stations are OK, it may be a station problem.
•
Check that the antenna is connected & adjusted correctly, in good working order and has
no broken wires.
•
See if anything is interfering with the antenna signal.
The remote control does not work.
•
Make sure the TV is plugged in.
•
Make sure there are fresh batteries in the remote control.
•
Make sure there is nothing blocking the remote control signal.
2008/3/31, 下午 02:25
25