Basic Operation - Disney W1320PTVD Guia Del Usuario

4. REMOTE CONTROL OPERATION
CHANNEL Up and Down buttons
Press the " +/-" button to select a higher or lower channel number.
0~9 Numberic Button
To select a TV station using A buttons 0~9.
For example:
Press number "9" button to select PROGRAMME "9".
l Two digit Programme Number
For example:selecting PROGRAMME "12"
1. Press the -/-- button, on screen will show --.
2. Press the number "1" button,on screen will show "1-".
3. Press the number "2" button,channel "12" will show.
Three digit Programme number
l
For example:selecting PROGRAMME "123"
1. Press the -/-- button twice, on screen will show ---.
2. Press the number "1" button,on screen will show "1--".
3. Press the number "2" button,on screen will show "12-".
4. Press the number "3" button,on screen will show "123".
POWER ( ) Button
l Press the button to switch the picture and sound ON/OFF the picture and sound.
MUTE Button ( )
l Press the Mute (
) button to switch OFF the sound,press once again to switch ON the
sound.
INPUT Button
l Press the INPUT mode button to select VIDEO mode.Press again to go back to TV mode.
TV/DVD Button
l Press the TV/DVD mode button to select DVD mode. Press again to go back to TV mode.
(There will be a few seconds delay before entering the DVD mode).
AUTO POWER-OFF FUNCTION
l When the TV is in TV or AV(video) mode and it' s without a signal for about 6 minutes, it will
automatically power off(standby mode) to save the energy.
14
W1320PTVD MIT IC +MTK1389R12197-20.p65 14-15
OPERATING YOUR DVD

BASIC OPERATION

1. Press "TV/AV/DVD" button on the unit or press the TV/DVD direct key on the remote handset
to turn on DVD.
2. Press "OPEN / CLOSE (EJECT)" ( ) button to load disc in disc tray.
3. Press "OPEN / CLOSE" ( ) button to close the tray.
• Hold the disc without touching either of its surfaces, position it with the printed title side
facing up.
Play Discs
1. Press the OPEN/CLOSE ( ) button on the front panel and load the Disc on the tray.
The label side should be facing upwards. For a Double-sided DVD Disc, put the disc with label
A/1 up.
2. Press the OPEN/CLOSE ( ) button again to close the tray and the disc will be loaded.
3. The Disc will be played automatically.
• If it is a DVD disc, it will show the Menu/Title Page on the screen.
• If it is a CD, it will play from the first.
4. Press the STOP button, if you want to stop the Disc playback You can resume playback by
pressing the PLAY button and it will start at the location where you have pressed stopped
(Resume Play).
5. Press the STOP Button twice to stop playback completely and return to the start.
TO ACCESS THE QUICK START MENUS:
To access the Quick Start menus, which will allow you to change the three most popular settings,
perform the following:
1. While in the DVD is in Stop mode, press the SETUP button to enter the Setup Menu.
2. Press the PLAY/ENTER button to select Quick setup(
3. Continue with steps 4-5 in the next section.
QUICK START MENU
QUICK SETUP
PLAYER MENU
TV DISPLAY
TV TYPE
< >
DOLBY DIGITAL
2008/3/31, 下午 02:25
).
ENGLISH
4:3 PAN&SCAN
PAL
ON
15